Wireless Shell

$11.90

 

note

accessories

packinglist

  • This is a module, must work with other PCB board.

Availability: 2221 In Stock

Clear
Quantiy:
Compare

Description

“Wireless Shell” is an ESP32-PICO + SX1276 module. provide Wi-Fi, BLE and LoRa solution. You can regard it is the module version “Wireless Stick Lite” with a better low power feature(10uA in deep sleep). 38.4 x 16.1 x 3.2(mm) size with 1.27mm stamp holes package makes it’s can be assembled into your PCB or products directly.


Overview

  • CE Certificate;
  • Main control chip ESP32-PICO (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1276;
  • RF shielding(contain a shield shell) and other protection measures;
  • Integrated WiFi, LoRa, Bluetooth network connections, both of them are IPEX socket;
  • Support the Arduino development environment;
  • (Exclusive) Supports the Arduino version of the ESP32 + LoRaWAN protocol routine provided by Heltec. This is a standard LoRaWAN protocol that can communicate with any gateway/base station running the LoRaWAN protocol (requires serial number activation, only the development of the company) The board is available, the serial number can be queried on this page);
  • With good RF circuit design and basic low-power design (sleep current: 10uA theoretically), it is convenient for IoT application vendors to quickly verify solutions and deploy applications;

Tech spec

Resource Parameter
Master Chip ESP32( 240MHz Tensilica LX6 dual-core + 1 ULP, 600 DMIPS)
Wireless Communication Wi-Fi Bluetooth LoRa
802.11 b/g/n (802.11n up to 150 Mbps) Bluetooth V4.2 BR/EDR and Bluetooth LE specification Node-to-node communication or LoRaWAN
LoRa Chip SX1276/SX1278
LoRaWAN Area hardware version Support frequency
LF EU433
CN470
HF IN865
EU868
US915
AU915
KR920
AS923
LoRa Maximum Output Power 19dB ± 1dB
Hardware Resource UART x 3; SPI x 2; I2C x 2; I2S x 1; 12-bits ADC input x 18; 8-bits DAC output x 2; GPIO x 22,GPI x 6
FLASH 8MB(64M-bits) SPI FLASH
RAM 520KB internal SRAM
Interface Micro USB x 1; LoRa Antenna interface(IPEX) x 1; 18 x 2.54 pin x 2
Maximum Size (Including protruding parts
such as switch and battery compartment)
59.3 x 24.8 x 8mm
USB to Serial Chip CP2102
Battery 3.7V Lithium(SH1.25 x 2 socket)
Solar Energy x
Battery Detection Circuit
External Device Power Control(Vext)
Low Power Deep Sleep 800μA
Display Size  0.49-inch OLED
Working Temperature -40~80℃
Electrical Features Condition  Minimum Typica  Maximum
Power Supply USB powered(≥500mA) 4.7V 5V 6V
Lithium powered(≥250mA) 3.3V 3.7V 4.2V
3.3V(pin)powered(≥150mA) 2.7V 3.3V 3.5V
5V(pin)powered(≥500mA) 4.7V 5V 6V
Power Consumption(mA) WIFI Scan 115mA
WIFI AP 135mA
LoRa 10dB output 50mA
LoRa 12dB output 60mA
LoRa 15dB output 110mA
LoRa 20dB output 130mA
Output  3.3V pin output 500mA
5V pin output (USB powered only) Equal to the input current
External device power control (Vext 3.3V) 350mA


Docs&resource


Test Info

                                                             LoRa 868MHz RF Power Output

                                                       LoRa 470MHz RF Power Output

                                                     Standing Wave Ratio (SWR) of 470MHz

                                                     Smith Chart of 470MHz

LoRa Band

433MHz, 470-510MHz, 863-870MHz, 902-928MHz

Interface

Micro USB|LoRa Antenna interface

Working temperature

-40~80℃

Size

38.4*16.1*3.6

Reviews

There are no reviews yet.

Be the first to review “Wireless Shell”

Your email address will not be published. Required fields are marked *