CubeCell Module Plus

$9.40

note

accessories

packing list

  • This is a module, must work with other PCB board.

Availability: In Stock

Clear
Quantiy:
Compare

Description

CubeCell (TM) is a new product series made by the Heltec team, mainly for LoRa/LoRaWAN node applications.CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated with the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably, and can easily connect lithium batteries and solar panels.HTCC-AM02 is a Module. Supports AT transparent transmission commands can be directly integrated into the application circuit.


Overview

  • Perfect Arduino-Compatible!
  • CE and FCC certification;
  • Based on ASR6502, this chip is already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262;
  • LoRaWAN 1.0.2 support;
  • Ultra low power design, 3.5uA in deep sleep;
  • 1.27 stamp edge design for SMT;
  • Good impedance matching and long communication distance.

 


Technical Parameters

Resource Parameter
Master Chip ASR6502 (48 MHz ARM® Cortex® M0+ MCU)
Wireless Communication LoRa
Node-to-node communication or LoRaWAN
LoRa Chip SX1262
LoRaWAN Area hardware version Support frequency
LF EU433
CN470
HF IN865
EU868
US915
AU915
KR920
AS923
LoRa Maximum Output Power 21dB ± 1dB
Hardware Resource UART x 2; SPI x 2; I2C x 2; SWD x 1; 12-bits ADC input x 3; 8–channel DMA engine; GPIO x 16
FLASH 128KB internal FLASH
RAM 16KB internal SRAM
Interface LoRa Antenna interface(IPEX) x 1; 12 x 1.27 stamp edge x 2 +11 x 1.27 stamp edge x 1
Maximum Size (Including protruding parts
such as switch and battery compartment)
 20.4 x 20.4 x 3 mm
USB to Serial Chip x
Battery x
Solar Energy x
Battery Detection Circuit x
External Device Power Control(Vext) x
Low Power Deep Sleep 3.5μA
Display Size No display
Working Temperature -40~80℃

Electrical Features

Electrical Features Condition  Minimum Typica  Maximum
Power Supply 3.3V(pin)powered(≥150mA) 2.7V 3.3V 3.5V
Power Consumption(mA) LoRa Rx Mode 10mA
LoRa 10dB output 70mA
LoRa 14dB output 90mA
LoRa 17dB output 100mA
LoRa 20dB output 105mA
Sleep Mode (3.3V header powered) 3.5μA

Docs&Resource


Test Info

                                LoRa 470MHz RF Power Output

                               LoRa 868MHz RF Power Output

                             Maximum communication distance test

 

LoRa Band

433MHz, 470-510MHz, 863-870MHz, 902-928MHz

Interface

LoRa Antenna interface(IPEX) x 1; 12 x 1.27 stamp edge x 2 +11 x 1.27 stamp edge x 1

Working temperature

-40~80℃

Size

20.4 x 20.4 x 3 mm

Reviews

There are no reviews yet.

Be the first to review “CubeCell Module Plus”

Your email address will not be published. Required fields are marked *