CubeCell Dev-Board Plus

$14.40

 

note

accessories

packinglist

  • Include antenna;
  • Include SH1.25 x 2 battery connector;
  • Not include battery;
  • 2.54 headers default not assemble.

Availability: 6550 In Stock

Clear
Quantiy:
Compare

Description

CubeCell (TM) is a new product series made by Heltec team, mainly for LoRa/LoRaWAN node applications.CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated with the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably, can easily connect lithium batteries and solar panels.HTCC-AB02 is a Dev-Board. Friendly designed for developers, easy to verify communication solutions.


Overview

  • CubeCell (TM) is a new product series made by the Heltec team, mainly for LoRa/LoRaWAN node applications.CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated with the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably, can easily connect lithium batteries and solar panels.HTCC-AB02 is a Dev-Board. Friendly designed for developers, easy to verify communication solutions.

Tech spec

Resource Parameter
Master Chip ASR6502 (48 MHz ARM® Cortex® M0+ MCU)
Wireless Communication LoRa
Node-to-node communication or LoRaWAN
LoRa Chip SX1262
LoRaWAN Area hardware version Support frequency
LF EU433
CN470
HF IN865
EU868
US915
AU915
KR920
AS923
LoRa Maximum Output Power 22dB ± 1dB
Hardware Resource UART x 2; SPI x 2; I2C x 2; SWD x 1; 12-bits ADC input x 3; 8–channel DMA engine; GPIO x 16
FLASH 128KB internal FLASH
RAM 16KB internal SRAM
Interface Micro USB x 1; LoRa Antenna interface(IPEX) x 1; 15 x 2.54 pin x 2+2 x 2.54 pin x 3
Maximum Size (Including protruding parts
such as switch and battery compartment)
51.9 x 25 x 8 mm
USB to Serial Chip CP2102
Battery 3.7V Lithium(SH1.25 x 2 socket)
Solar Energy 5.5~7V solar panel
Battery Detection Circuit
External Device Power Control(Vext)
Low Power Deep Sleep 3.5μA
Display Size 0.96-inch OLED
Working Temperature -40~80℃
Electrical Features Condition  Minimum Typica  Maximum
Power Supply USB powered(≥500mA) 4.7V 5V 6V
Lithium powered(≥250mA) 3.3V 3.7V 4.2V
3.3V(pin)powered(≥150mA) 2.7V 3.3V 3.5V
5V(pin)powered(≥500mA) 4.7V 5V 6V
Power Consumption(mA) LoRa Rx Mode 10mA
LoRa 10dB output 70mA
LoRa 14dB output 90mA
LoRa 17dB output 100mA
LoRa 20dB output 105mA
Sleep Mode (USB powered) 9.6mA
Sleep Mode (VBAT/battery powered) 11μA
Sleep Mode (3.3V header powered) 3.5μA
Output  3.3V pin output 500mA
5V pin output (USB powered only) Equal to the input current
External device power control (Vext 3.3V) 350mA

Docs&Resource


Test Info

                                                      LoRa 470MHz RF Power Output

                                                           Low power test in sleep mode

                                                  Communicate with the gateway(HT-M02)

                                                                 LoRa pingpong test

 

                                                          Maximum communication distance test
LoRa Band

433MHz, 470-510MHz, 863-870MHz, 902-928MHz

Interface

Micro USB|LoRa Antenna interface

Working temperature

-40~80℃

Size

41.5 x 25 x 7.6 mm, 51.9 x 25 x 8 mm

Reviews

There are no reviews yet.

Be the first to review “CubeCell Dev-Board Plus”

Your email address will not be published. Required fields are marked *