CubeCell Capsule Solar Sensor

$19.40$27.50

note

accessories

packinglist

  • Include antenna;
  • Integrated 80mAh lithium battery;
  • Capsule don’t have a debug interface, develop or program it, must work with a debugger.

Availability: 222221 In Stock

Clear
Quantiy:
Compare

Description

CubeCell (TM) is a new product series made by Heltec team, mainly for LoRa/LoRaWAN node applications.CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated with the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably, can easily connect lithium batteries and solar panels.HTCC-AB01 is a Dev-Board. Friendly designed for developers, easy to verify communication solutions.


Overview

  • Perfect Arduino-Compatible!
  • CE and FCC certification;
  • Internal RGB light;
  • Based on ASR605x (ASR6501, ASR6502), those chips are already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262;
  • LoRaWAN 1.0.2 support;
  • Ultra low power design, 3.5uA in deep sleep;
  • Onboard solar energy management system, can directly connect with a 5.5~7V solar panel;
  • Reserved battery solder pad;
  • Good impendence matching and long communication distance.

Tech spec

Resource Parameter
Master Chip ASR6501 (48 MHz ARM® Cortex® M0+ MCU )
Wireless Communication LoRa
Node-to-node communication or LoRaWANNode-to-node communication or LoRaWANNode-to-node communication or LoRaWAN
LoRa Chip SX1262
LoRaWAN Area hardware version Support frequency
LF EU433
CN470
HF IN865
EU868
US915
AU915
KR920
AS923
LoRa Maximum Output Power 21dB ± 1dB
Hardware Resource UART x 1; SPI x 1; I2C x 1; SWD x 1; 8–channel DMA engine; GPIO x 6
FLASH 128KB internal FLASH
RAM 16KB internal SRAM
Interface LoRa Antenna interface(IPEX) x 1; 5 x 2.54 pin x 4
Maximum Size (Including protruding parts
such as switch and battery compartment)
diameter 30mm,height 67mm
USB to Serial Chip x
Battery 3.7V Lithium(solder pad)
Solar Energy 5.5~7V solar panel
Battery Detection Circuit
External Device Power Control(Vext)
Low Power Deep Sleep 3.5μA
Display Size No display
Working Temperature -40~80℃
Electrical Features Condition  Minimum Typica  Maximum
Power Supply USB powered(≥500mA) 4.7V 5V 6V
Lithium powered(≥250mA) 3.3V 3.7V 4.2V
3.3V(pin)powered(≥150mA) 2.7V 3.3V 3.5V
5V(pin)powered(≥500mA) 4.7V 5V 6V
Power Consumption(mA) LoRa Rx Mode 10mA
LoRa 10dB output 70mA
LoRa 14dB output 90mA
LoRa 17dB output 100mA
LoRa 20dB output 105mA
Sleep Mode (VBAT/battery powered) 11μA
Sleep Mode (3.3V header powered) 3.5μA
Output  3.3V pin output 500mA
External device power control (Vext 3.3V) 350mA

 


Docs&resource

 


Test Info

                                               LoRa 470MHz RF Power Output

                                                LoRa 868MHz RF Power Output

                                                Maximum communication distance test

LoRa Band

433MHz, 470-510MHz, 863-870MHz, 902-928MHz

Interface

LoRa Antenna interface(IPEX)

Working temperature

-40~80℃

Size

diameter 30mm|height 67mm

Sensor Type

BH1750 light intensity sensor, BMP180 barometric pressure sensor, CCS811B Air quality sensor, HDC1080 temperature and humidity sensor, MPU9250 9-axis attitude sensor, No sensor required Nonporous shell, No sensor required porous shell

Reviews

There are no reviews yet.

Be the first to review “CubeCell Capsule Solar Sensor”

Your email address will not be published. Required fields are marked *