CubeCell – Capsule Sensor

$16.30$22.00

note

accessories

packinglist

  • Include antenna;
  • Not include battery;
  • 2.54 headers default not assemble.
  • 1/2 AA Lithium chlorine sulfite battery
  • Solar Panel
  • Antenna

Availability: 33333 In Stock

Clear
Quantiy:
Compare

Description

CubeCell (TM) is a new product series made by the Heltec team, mainly for LoRa/LoRaWAN node applications.CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated into the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably, and can easily connect lithium batteries and solar panels.HTCC-AC01 is a LoRa end-node sensor. With complete enclosure and protection measures, it can be deployed directly into real-world applications.


Overview

  • Perfect Arduino-Compatible!
  • CE and FCC certification;
  • Internal RGB light;
  • Based on ASR605x (ASR6501, ASR6502), those chips are already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262;
  • LoRaWAN 1.0.3 support;
  • Ultra low power design, 3.5uA in deep sleep;
  • Onboard solar energy management system, can directly connect with a 5.5~7V solar panel;
  • Reserved battery solder pad;
  • Good impendence matching and long communication distance.

Tech spec

Resource Parameter
Master Chip ASR6501 (48 MHz ARM® Cortex® M0+ MCU )
Wireless Communication LoRa
Node-to-node communication or LoRaWANNode-to-node communication or LoRaWANNode-to-node communication or LoRaWAN
LoRa Chip SX1262
LoRaWAN Area hardware version Support frequency
LF EU433
CN470
HF IN865
EU868
US915
AU915
KR920
AS923
LoRa Maximum Output Power 21dB ± 1dB
Hardware Resource UART x 1; SPI x 1; I2C x 1; SWD x 1; 8–channel DMA engine; GPIO x 6
FLASH 128KB internal FLASH
RAM 16KB internal SRAM
Interface LoRa Antenna interface(IPEX) x 1; 5 x 2.54 pin x 4
Maximum Size (Including protruding parts
such as switch and battery compartment)
diameter 30mm,height 67mm
USB to Serial Chip x
Battery 3.7V Lithium(solder pad)
Solar Energy 5.5~7V solar panel
Battery Detection Circuit
External Device Power Control(Vext)
Low Power Deep Sleep 3.5μA
Display Size No display
Working Temperature -40~80℃
Electrical Features Condition  Minimum Typica  Maximum
Power Supply USB powered(≥500mA) 4.7V 5V 6V
Lithium powered(≥250mA) 3.3V 3.7V 4.2V
3.3V(pin)powered(≥150mA) 2.7V 3.3V 3.5V
5V(pin)powered(≥500mA) 4.7V 5V 6V
Power Consumption(mA) LoRa Rx Mode 10mA
LoRa 10dB output 70mA
LoRa 14dB output 90mA
LoRa 17dB output 100mA
LoRa 20dB output 105mA
Sleep Mode (VBAT/battery powered) 11μA
Sleep Mode (3.3V header powered) 3.5μA
Output  3.3V pin output 500mA
External device power control (Vext 3.3V) 350mA

 


Docs&resource


Test Info

                                                         LoRa 868MHz RF Power Output

                                                      Maximum communication distance test

                                                          LoRa 470MHz RF Power Output

LoRa Band

433MHz, 470-510MHz, 863-870MHz, 902-928MHz

Interface

LoRa Antenna interface(IPEX)

Working temperature

-40~80℃

Size

diameter 30mm|height 67mm

Sensor Type

BH1750 light intensity sensor, BMP180 barometric pressure sensor, CCS811B Air quality sensor, HDC1080 temperature and humidity sensor, MPU9250 9-axis attitude sensor, No sensor required Nonporous shell, No sensor required porous shell

Reviews

There are no reviews yet.

Be the first to review “CubeCell – Capsule Sensor”

Your email address will not be published. Required fields are marked *