Arduino UNO R3 Board ATmega328P ATmega16U2 with USB Cable




packing list

  • 2x Potentiometer(10KΩ)
  • 2x 1N4148 Diode
  • 5x Button(small)
  • 2x Switch
  • Contains some modules designed by Adeept(Relay Module, DC Motor Module, Rotary Encoder Module, etc.), beautiful appearance & practical functions

Availability: 3333 In Stock

3333 in stock



The Arduino UNO is a microcontroller board based on the ATmega328. It has 14 digital input-output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.

Technical Specifications:

– Microcontroller: ATmega328
– Operating Voltage: DC5V
– Input Voltage (recommended): 7-12V
– Input Voltage (limits): 6-20V
– Digital IO Pins: 4 (of which 6 provide PWM output)
– Analog Input Pins: 6
– DC Current per IO Pin: 40mA
– DC Current for 3.3V Pin: 50mA
– Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by the bootloader
– SRAM: 2 KB
– Clock Speed: 16 MHz

Package List:

1x Adeept Arduino UNO R3 Board
1x USB Cable

Weight 0.1 g
Dimensions 10 × 20 × 5 cm
Power Supply

3.7V Lithium battery


165mm*165mm*140mm ( starter kit ) 215mm*165mm*168mm ( standard kit), 21.9cm*31.4cm*1.8cm

Product Weight



There are no reviews yet.

Be the first to review “Arduino UNO R3 Board ATmega328P ATmega16U2 with USB Cable”

Your email address will not be published. Required fields are marked *